2006 Ellis 36 Hardtop Express Cruiser
LOA 35' 10" BEAM 13' 2" DRAFT 3' 10"

HULL:

• Built-down semi-displacement hull with integral solid fiberglass skeg protecting the shaft, propeller and rudder
• 1° deadrise at transom
• ISO NPG gelcoat with blister-resistant vinylester resin
• Red Awlgrip® hull
• High-tech composite with stitched biaxial E-Glass construction for superior strength
• Vacuum bagged ATC Core-Cell® structural foam core
• Stitched biaxial structural E-Glass reinforced stringer system
• Gelcoat finished bilges for ease of maintenance
• Fiberglass swim platform with solid ½" teak deck
• Undermount coated aluminum swim ladder
• Awlgrip® boot stripe
• Unepoxy antifouling bottom paint under contrasting ablative bottom paint

DECK:

• ISO NPG gelcoat with vinylester resin
• High-tech composite with stitched biaxial E-Glass construction for superior strength
• Vacuum bagged ATC Core-Cell® structural foam core
• Custom gelcoat finished non-skid surface

ENGINE SYSTEM:

• 7.4 liter 6-cylinder, fresh water-cooled 500-hp Yanmar 6CX-GTE2 diesel engine
• Oil change kit
• Oil catch basin under engine
• 2.5:1 ZF Model 280 transmission
• Sealed 2” stainless steel Evolution Quiet Drive shaft system
• 26” 5-blade magnesium-bronze propeller
• 60-amp, 12-volt alternator
• Seawater cooled Integrated Exhaust Hull Structure (IEHS™)
• Groco 2” raw water intake strainer
• Engine air intake through aft cockpit grills
• White gelcoat finished engine room
• 2” Soundown™ sound insulation on main bulkhead, under all floor panels & hatches
• All access hatches lined with acoustical gasketing
• Engine compartment cooling through side-mounted, molded fiberglass, dorads
• All thru-hulls isolated with solid glass to insure integrity of Core-Cell® core
• Ball valve style silicon bronze seacocks with double hose clamps on all hoses

FUEL SYSTEM:

• (2) ABYC, NMMA & USCG approved 105-gallon baffled aluminum fuel tanks
• Twin 50-gallon cruising tanks (vessel carries 310-gallons of fuel!)
• 900 Series Racor 30-micron primary fuel filter/water separator
• Yanmar 2-micron secondary fuel filter/water separator
• (4) 2” Scandvik 316 polished stainless steel diesel deck fills
• USCG approved, fire resistant fuel hoses

STEERING SYSTEM:

• Marine Hydraulics Hydro-Slave® power steering system
• 316 stainless steel rudder (1½” diameter rudder post)
• IMTRA SP55 electric bow thruster with helm control
• Patented Ellis Sidekick Docking System with Mastervolt 12kW genset

FORWARD CABIN:

• 7' 6" V-berth with 6” Sunbrella® covered cushions with memory foam and breathable top layer
• Teak V-berth trim
• Cypress sheathing surrounding V-berth
• Drop-in storage compartments under V-berth cushions
• Teak drawers and drop-down lockers under V-berth
• Dovetailed solid wood drawer boxes
• Chain locker forward with teak louvered door
• Large cedar lined hanging locker to starboard with 3 shelves, hangar pole and teak louvered door
• Solid ½" teak cabin floor
• Leather grained headliner with teak trim
• (2) Bomar hatches with self-contained OceanAir® sun shades and screens
• Insulated floor locker, with stainless steel latch and hinges, between V-berth
• Insulated floor locker, with stainless steel latch and hinges, between galley and head

GALLEY:

• Corian® counter
• Scandvik hand-polished 304 stainless steel double sink with washerless Moen faucet
• Teak drawers and storage lockers below counter
• Dovetailed solid wood drawer boxes
• Teak trimmed sliding door storage cabinet
• Top loading pot storage locker
• Panasonic 1.2 cubic foot stainless steel microwave
• Princess Euro 3-burner electric range/oven with folding lift cover
• Hot and cold pressurized water
• Nova Kool® 12-volt DC/120-volt AC refrigerator with freezer compartment
• Custom Ellis designed teak plate and bowl storage rack
• Custom Ellis designed teak mug and spice rack
• Melamine dinnerware: (8) 12oz mugs, (8) 8” salad plates, (8) 10” dinner plates, (8) 16oz soup bowls
• (8) 14oz Makrolon tumblers
• (2) 3.3qt food canisters, (2) 1.5qt food canisters, (2) 0.6qt food canisters, and salt & pepper mills
• Teak towel rack

HEAD:

• Teak sliding door
• Corian® counter
• Teak trimmed sliding door storage cabinet
• Teak framed mirror above sink cabinet
• Dovetailed solid wood drawer boxes
• Scandvik 13” hand-polished 304 stainless steel sink with washerless Moen faucet
• Separate molded fiberglass shower with seat
• Alsons shower head & mixing valve
• Bi-folding ½” clear acrylic shower door
• Hot and cold pressurized water
• Separate shower sump
• (2) stainless steel towel bars

SHELTER:

• Express Cruiser hardtop with custom gelcoat finished non-skid surface and teak supports
• Acoustical headliner with teak trim
• (2) Bomar hatches with self-contained OceanAir® sun shades and screens
• (2) 316 stainless steel handrails on hardtop
• Stamoid side curtains and three-panel backdrop with eisenglass panels
• Powder coated aluminum electronics mast
• Teak cap rail
• Port and starboard Ellis Cantilevered Hydraulic Seats™ with Sunbrella® covered cushions (convert to 2 settees or 2 twin bunks in conjunction stern seats)
• (2) solid teak trimmed sliding door storage lockers
• Teak helm and navigation station side arm tops house controls for hydraulic seats, additional electronics, and chase for optional air conditioning duct and discharge grill
• Teak companionway doors and cover
• Removable teak companionway stairs
• (2) 30” x 48” folding teak tables mounted on port and starboard cabin sides
• (3) Large (26½” x 61”) engine room hatches with gas struts, 4” diameter stainless steel compression latches and hinges (removable hatch irons create a single 86” x 61” opening)
• (25” x 25”) shaft access and storage hatch with gas struts, 4” diameter stainless steel compression latch and hinges
• (3) front powder coated aluminum opening windshields
• (3) 3-speed, self-parking, pantograph windshield wipers with washers
• (2) powder coated aluminum side windows
• Solid ½" teak shelter floor
• Varnished teak sidestripe

HELM STATION:

• Enclosed cabinet with teak top and fiberglass instrument insert
• Teak trimmed electrical, electronics and hydraulic access panel
• Ellis adjustable teak and hand-polished stainless steel footrest
• Kobelt® heavy duty bronze and stainless steel two lever controls
• Engine control panel:
• Start/Stop control
• Tachometer w/hour meter
• Engine temperature
• Engine oil pressure
• Voltmeter
• Water temp and oil pressure alarm
• Lighted Ritchie 4½” Binnacle compass
• Northstar 6000i Network Chartplotter 10.4"
• Northstar RAD4KD-A, 25"/4kW Radome
• Simrad Autopilot AP26
• Northstar 491 600/1000 Watt Echo Sounder with Furuno 520-BLD thru hull transducer
• (6) Speaker Jensen stereo system with 10-disc CD changer
• Icom VHF radio
• Tank Tender fuel level indicators
• Windlass and air horn controls
• Operators electrical control panel
• Stazo 24” stainless steel destroyer wheel
• Ellis designed “Pump Running Indicator Light System”

NAVIGATION STATION:

• Enclosed cabinet with top storage compartment with hinged teak cover
• Teak trimmed electrical access panel
• Ellis adjustable teak and hand-polished stainless steel footrest

COCKPIT:

• (2) teak folding stern seats with Sunbrella® covered cushions (convert to twin bunks in conjunction with Ellis Cantilevered Hydraulic Seats™)
• (3) Large (25½” x 32½”) lazaret hatches with gas struts, 4” diameter stainless steel compression latches and hinges (removable hatch irons create a single 84” x 25½” opening)
• (2) teak trimmed sliding door storage lockers
• Solid ½" teak cockpit floor
• SHURflo PRO Blaster™ 3.5 GPM high pressure pump supplies salt water to bow and cockpit faucets
• Additional fresh water faucet in cockpit
• Scandvik retractable cockpit shower with recessed mixing valve

DECK HARDWARE:

• 1" diameter type 316 hand-polished stainless steel bow rail
• (2) 1" diameter type 316 hand-polished stainless steel hand rails on cabin top
• (2) 1" diameter type 316 hand-polished stainless steel hand rails on front corners of shelter
• (4) 10” 316 polished stainless steel cleats (2 amidships, 2 aft)
• (1) 7” polished stainless steel bow bitt
• (2) 6” 316 polished stainless steel skene bow chocks
• (2) polished stainless steel fender eyes amidships
• Polished stainless steel flagpole holder, ferruled solid teak flag staff and 3’x5’ U.S. flag
• Fiberglass bow pulpit with 316 hand-polished stainless steel anchor roller and Lewmar Concept 1 windlass
• 33-lb stainless steel Bruce anchor with 150’ of 5/16” chain and 150’ of 5/8” nylon
• (6) polished 316 stainless steel opening port lights with angled spigots and screens
• Varnished teak guards and rails with solid polished stainless steel half oval

 WASTE DISPOSAL:

• 36-gallon stainless steel holding tank with macerator pump overboard discharge
• 1½” Scandvik polished stainless steel deck pump out plate
• Sealand Model 547 12-volt DC VacuFlush® marine head with 12-volt vacuum generator
• All gray water drainage through 2 isolated thru hulls

FRESH WATER SYSTEM:

• (2) 50-gallon stainless steel water tanks
• 12-gallon stainless steel hot water tank
• FDA approved color-coded (blue cold/red hot) Whale semi-rigid pipe work system
• 3.8 GPM 12-volt DC SHURflo water pump
• 1½” Scandvik polished stainless steel deck fill plate

120-VOLT AC ELECTRICAL SYSTEM:

• 12kW MasterVolt generator
• 16,000btu Cruisair® reverse cycle air conditioning
• 50-amp 120-volt AC shore power
• 25’, 50-amp, shore power cord
• Xantrex Truecharge 20+ charger (20-amp, charges 3 battery banks simultaneously)
• Illuminated AC circuit breaker panel with flush breakers and digital monitor
• 120-volt GFCI protected outlets (2) in galley, (1) in head and (2) in shelter
• Fully bonded and grounded to meet ABYC standards (safeguarding against galvanic corrosion)

12-VOLT DC ELECTRICAL SYSTEM:

• (1) 4D dedicated engine starting battery
• (2) 8D deep cycle house batteries
• USCG & ABYC approved polyethylene battery boxes
• Heavy-duty battery switch with parallel capabilities for emergency starting
• Illuminated DC circuit breaker panel with flush breakers and digital monitor
• DC sub panel on sidearm at helm
• 12-volt DC outlets at helm and navigation stations
• 12-volt DC dual trumpet air horn
• USCG approved running and masthead lights
• (1) 1” 650 GPH 12-volt Jabsco diaphragm main bilge pump located above bilge for easy access, automatically controlled by Ultra Safety Systems Ultraswitch™ float switch, bilge strainer located just aft of the engine
• (2) ¾” 800 GPH automatic 12-volt electric bilge pumps, automatically controlled by Rule Model 37WG SuperSwitch ™ float switches; (1) located forward of main bulkhead, (1) auxiliary pump located in engine compartment just forward of engine. Auxiliary pump mounted higher than main bilge pump, turns on automatically should main pump fail, and is wired to independent battery source should the battery operating main pump loose its charge.
• ABYC certified wiring throughout

LIGHTING:

• 5½” stainless steel dome lights (2) over V-berth, (2) in galley, (1) in head, (1) in shower, (2) in shelter, (1) above companionway (includes red lens to preserve night vision)
• Scandvik 17¾” Xelogen vanity light on mirror in head
• (4) engine room lights
• (4) cockpit lights
• Guest spotlight on bow with helm control

WOOD FINISH:

• Epifanes® gloss varnished teak guards, rails and sidestripe
• Epifanes® satin varnish in cabin
• Epifanes® gloss varnish in shelter and exterior

OUR SELLING PRICE: Reduced To $395,000

| PHOTOS |

Specifications may vary. Information believed to be correct, but not guaranteed. Listings are subject to prior sale, price changes or withdrawal.